• PCB Corrosion: Causes and Prevention Methods

    PCB Corrosion: Causes and Prevention Methods

    PCB corrosion is caused by many different factors, such as Atmospheric Corrosion, Localized Corrosion, Electric Corrosion, Electrolytic Corrosion, Electrolytic Dendrite Formation, Fretting Corrosion and Intergranular Corrosion. Corrosion can be extremely harmful to PCBs. Although there are many reasons that can cause P...

    Oct 27, 202024200

  • Analysis of Membrane Switch LED Failures

    Analysis of Membrane Switch LED Failures

    The membrane switch uses SMD LED lamps (0603, 0805, 1206). According to the color of the luminous tube, LED can be divided into white light, red, orange, yellow, green (subdivided into yellow-green, standard green and pure green), blue light and so on. In addition, some light-emitting diodes contain chips of two or thr...

    Oct 26, 202015562

  • 10 Methods for PCB Heat Dissipation

    10 Methods for PCB Heat Dissipation

    The heat generated by electronic equipment causes the internal temperature to rise rapidly. If the heat is not dissipated in time, the equipment will continue to heat up and the components will overheat and fail, resulting in a decrease in the reliability of electronic equipment. Therefore, PCB heat dissipation is a ve...

    Oct 23, 202016882

  • Which Software Do You Use to Design PCB?

    Which Software Do You Use to Design PCB?

    Membrane switches and PCBs are inextricably linked. This link is also reflected in the design process of the two. In order to design an efficient PCB and membrane switch, engineer must have a relatively handy design software. Let's take a look at the commonly used PCB/Membrane Switch design software. 1.Protel/DXP/A...

    Oct 21, 2020132636

  • FR-4-The Best Material for PCB Manufacturing

    FR-4-The Best Material for PCB Manufacturing

    FR-4 is a glass epoxy laminate, most commonly used in PCBs (printed circuit boards). It is used in various flexible printed circuit boards and other semi-rigid variants. It shows excellent high strength and flame retardancy. The easy integration of applications and the allowable component mounting make it the material ...

    Oct 21, 202014040

  • The Issues of Safety Spacing in PCB Design

    The Issues of Safety Spacing in PCB Design

    We will encounter various safety spacing issues in ordinary PCB design, such as the spacing between vias and pads, the spacing between traces and traces, etc., which should be considered. . So today we will divide these spacing requirements into two categories, one is: electrical safety spacing; the other is: non-elect...

    Oct 21, 202017402

  • Points Needing Attention in the Production of Flexible PCB

    Points Needing Attention in the Production of Flexible PCB

    The manufacture of flexible PCBs involves several complicated steps, and extreme care must be taken. Some design or manufacturing defects can cause the entire circuit board to fail. During the PCB manufacturing process, please follow the precautions listed below: 1. Use the right type and quantity of materials to maint...

    Oct 20, 202010944

  • PCB Design Skills: Packaging and Components

    PCB Design Skills: Packaging and Components

    The choice of components and the size of the PCB are interdependent. Therefore, when choosing the right components for rigid flexible printed circuit boards (PCBs) or other types of PCBs, the footprint of the PCB must also be considered. The package is the basic layout of the PCB. It includes electrical and mechanical ...

    Oct 20, 202011088

  • 10 Classic EMC Problems

    10 Classic EMC Problems

    Learning to contact a new technology will always encounter various problems, and learning EMC is no exception. EMC includes two parts: EMS and EMI. Generally speaking, solving the EMC problem is actually solving the external radiation interference of electronic equipment, or how to prevent the equipment and electronic ...

    Oct 20, 202010780

  • Introduction of LED Aluminum Substrates

    Introduction of LED Aluminum Substrates

    In Membrane Switch production, we use LEDs very often. Today, we are going to introduce LED Aluminum Substrates. As soon as LED aluminum substrates came to the market, the development of the heat dissipation application industry started. Because of the heat dissipation characteristics of LED aluminum substrates, and al...

    Oct 19, 202012884

  • Membrane Switch Inspection Methods

    Membrane Switch Inspection Methods

    1. Shape: shape, conductor line, insulation treatment, liner combination, etc. should meet the requirements of the drawing or provide physical samples. 2. Material: panel, substrate, silver paste, carbon ink, spacer, adhesive, adhesive, reinforcing plate, insulation printing should meet the requirements of the drawing....

    Oct 19, 202017288

  • Analysis of the Causes of LED Damage and Introduction of LED Circuit Protection Methods

    Analysis of the Causes of LED Damage and Introduction of LED Circuit Protection Methods

    White light LED is a voltage-sensitive device. In actual work, the current is 20mA as the upper limit, but the current will often increase due to various reasons in use. If no protective measures are taken, this increased current The LED will be damaged after a certain time and range. The main reasons for LED damage ar...

    Oct 17, 202010260