• In-Mold Decoration: Raw Materials And Injection Molding Machine

    In-Mold Decoration: Raw Materials And Injection Molding Machine

    1. Raw Materials Thermoplastic When the temperature is lowered, thermoplastics for IMD/silkscreen can soften and melt. If heated again, they can still soften and melt, and cool and harden. All of these can be repeated over and over again. Thermoset plastic Thermoset plastics begin to soften and have plasticity when hea...

    Apr 24, 20241540

  • Introduction to In-Mold Decoration And Film Insert Molding

    Introduction to In-Mold Decoration And Film Insert Molding

    In-mold decoration (IMD) and film insert molding (FIM) have diversified patterns. They are both affordable, and belong to hot stamping. Hot stamping is a method of transferring a coating on a carrier foil film to the surface by heating and pressure. In the 1990s, this technology began to be applied in the decoration of...

    Apr 17, 20242280

  • In-Mold Decoration: Features, Techniques And Practicality

    In-Mold Decoration: Features, Techniques And Practicality

    Traditional plastic processing has gradually been unable to meet the needs of new things. With the popularity of light, thin, short consumer electronics and environmental awareness, in-mold decoration (IMD) goes into service. Due to many advantages, IMD is widely used in everywhere, such as household appliances, comput...

    Mar 20, 20242540

  • In-Mold Decoration: Quality Control, Dust-Free Environment And Technological Requirements

    In-Mold Decoration: Quality Control, Dust-Free Environment And Technological Requirements

    1. Quality Control In the production process of in-mold decoration, there are some items of quality inspection. Hardness test Test the IMD process product with a hardness tester. Apply a certain gravity, and use a 2H-3H pencil to test the quality index on the smooth surface of the PET film. Cross-cut test Test the bond...

    Mar 12, 20242380

  • Introduction to In-Mold Electronics

    Introduction to In-Mold Electronics

    Higher integration in electronics is a growing trend. It is a more complex solution than the current method of mounting a rigid printed circuit board (PCB) behind a decorative surface. In-mold electronics (IME) drives this trend by incorporating integrated functionality into components with decorative thermoformed 3D s...

    Jan 24, 20243060

  • Pros And Cons of In-Mold Decoration (IMD)

    Pros And Cons of In-Mold Decoration (IMD)

    As a good and popular injection molding technology, in-mold decoration has some advantages compared with other traditional technologies. 1. The injection molding needs of flat and multi-curved products can be achieved through the integration of in-mold labeling (IML) and in-mold forming (IMF). The technology gives the ...

    Dec 13, 20234440

  • Technological Processes of In-Mold Decoration

    Technological Processes of In-Mold Decoration

    1. Overview In-mold decoration (IMD) is the technology that can achieve component injection molding and surface decoration at the same time. It integrates functionality and aesthetics. It is currently the lowest-cost and most efficient technology in the automotive interior production process. IMD technology is composed...

    Dec 12, 20233520

  • 5 Technologies of Car Interiors

    5 Technologies of Car Interiors

    To design better car interiors, we continue to find out new materials and combinations of various design solutions to make the interior design more harmonious with the driver. There are various factors that we concern about: comfort, attractiveness, durability, and practicality. Materials such as genuine leather, walnu...

    Nov 7, 20235520

  • Quality Control of In-Mold Decoration

    Quality Control of In-Mold Decoration

    When talking about in-mold decoration, the commonly used quality inspection process is: 1. Hardness test. Use the hardness tester to apply certain gravity, and use a 2H-3H pencil to test the quality index on the smooth surface of the PET film finished by IMD process. 2. Cross-cut test. Test the bonding force of PET fil...

    Aug 9, 20235480

  • Something You Need to Know about In-Mold Decoration

    Something You Need to Know about In-Mold Decoration

    Nowadays, the traditional injection molding process can no longer meet the surface requirements, especially in the rapid developing fields of electronic consumer products. Mobile phones and wearable devices are what I'm talking about. These products have extremely high requirements on appearance, abrasion resistanc...

    May 16, 20237000

  • Application of In-mold Decoration Technology

    Application of In-mold Decoration Technology

    In-Mold Decoration (IMD) is a plastic product surface decoration process. It helps people to get the desired shape and size of the part by molding the material, and also can give the external surface of the part certain physical, chemical, electrical and tactile decorative engineering properties, etc. It is increasingl...

    Oct 13, 202210320

  • From Now On, Enjoy the High-standard IMD Services Brought by JRPanel !

    From Now On, Enjoy the High-standard IMD Services Brought by JRPanel !

    IMD refers to in-mold decoration technology, also known as no-paint technology. It is a molding method in which a printed film is placed in a metal mold and the resin for molding is injected into the mold to bond with the film so that the printed film and the resin are combined into a finished product. IMD-in-mold deco...

    Sep 27, 202212260