At present, the maintenance of medical equipment is a rather complicated task. Many medical institutions have equipment departments responsible for maintaining the safety and stability of the equipment. However, there are still many problems that many equipment maintenance personnel do not understand or pay attention to. 

JRPanel has more than ten years of design and processing experience in the industrial equipment industry. We have cooperated with many manufacturers that specialize in the production of medical equipment. Today JRPanel will popularize the maintenance of medical equipment.

1. Careful daily maintenance is essential to ensure the normal operation of equipment

Routine maintenance may seem simple, but in many cases it is easily overlooked. But in many cases, big problems are often accumulated from small problems. It is necessary to actively cooperate with clinical users to keep the surface of the instrument clean. It is necessary to check whether the voltage and power supply are normal before use. In the process of use, also pay attention to observe whether the function of the instrument is normal and fill in the use record. Develop good usage habits, which can effectively avoid damage incidents.

2. Equipment maintenance work must be handled carefully and not carelessly

When equipment fails, information collection and preparation work must be done before maintenance. This information includes the instrument model, factory number, time when the fault occurred, whether there is any abnormal sound when the fault occurs, whether there has been a sudden power failure, whether the instrument has been moved, etc.

During the maintenance process, the following points should also be noted. In the process of disassembling medical equipment, pay attention to the order and do not use brute force to disassemble it. The disassembled fastening screws, small parts, etc. should not be placed randomly, and should be placed separately to avoid loss. After the equipment is repaired and installed, it will be restored step by step in the reverse order and there will be no extra parts. Damaged parts should also be marked and restored after replacement, without making mistakes.

After the repair work is completed, clean the surface of the instrument and turn on the power to see if it can work normally. Calibrate the instrument and restore it to its normal working state, and then give it to the user to try it out to check whether the instrument is restored to its original working state, so as not to leave hidden dangers. Finally, clean up the site, check for missing tools, etc., and fill in the maintenance log for review.

When the maintenance engineer is repairing the instrument, he must always pay attention to the protection work, whether it is leakage or cross-infection, etc., they must pay attention to protection. Don't cause unnecessary accidental injury.

3. Regular maintenance and inspection

The detailed preventive maintenance content should include:

Visual inspection:

First, check whether the buttons, switches, connectors and sockets of the instrument are loose or misplaced, whether the contacts of the plugs and sockets are oxidized, rusted, or have poor contact, whether the power cord is aging, whether the heat dissipation and exhaust air are normal, and the various grounding connections and pipelines Whether the connection is good.

Cleaning and maintenance:

Clean the surface and internal electrical parts and mechanical parts of the instrument, including cleaning the filter screen and related pipes, clean the relevant plugs and sockets of the instrument, prevent poor contact, and lubricate the necessary mechanical parts.

Replace the wearing parts:

Timely replace the components that have reached the service life and performance degradation, substandard components or the parts that require regular replacement as specified in the instruction manual, to prevent possible failures from expanding or causing the whole machine to malfunction. Supervise relevant personnel to charge regularly and eliminate obvious and potential faults of the equipment.

Function check:

Turn on and check whether the indicators and indicators are normal, and enter each function setting by adjusting and setting each switch and button to check whether the basic functions of the device are normal. Through the simulation test, check whether the alarm functions of the equipment are normal.

Performance test calibration:

Test the voltage value of each DC power supply, the voltage value or waveform of the test point in the circuit, and perform the necessary calibration and adjustment according to the requirements of the manual to ensure that the technical indicators of the instrument meet the standards and ensure the quality of the instrument in medical diagnosis and treatment .

Security check:

1. Check whether the frame is firm, whether the mechanical operation is normal, and whether the connecting parts are loose, falling off or broken.

2. Check whether the various leads, plugs, connectors, etc. are damaged, whether the grounding wire is secure, whether the grounding resistance and leakage current are within the allowable limits.

However, if the control panel or control keypad of your equipments and instruments is damaged, we are your best choice, who can provide you the best solution. 

Since the establishment of the company, JRPanel is committed to building a diversified one-stop industrial customization platform.