Introduction

Powder density is the mass per unit volume.it can be classified as bulk density and tap density by different measuring method.

Tap density tester is to measure the density of powder has been tapped or packed by standardized and repeatable procedures according to international standards.

Features

1. Drop height-easily adjustment

The drop height is important for a tap density tester in order to meet different international standards. This tap density tester uses default 3mm height and some tapping washers in specific height to reach 14mm.They changes easily without opening the cover.

2. Working panel-intuitive

The intuitive LED and membrane working panel brings operator and easy and fast operation.Accurate to 4 decimals.Automatically saving all test information.Operator simply inputs the desired data and press start to test.

3. Rpm-easily adjustment

The rpm is also important for a tap density tester.This instrument uses a speed control to realize 250rpm and 300 rpm.The motor is default 300 rpm,just tun the knob and reach the right percentage to shift to 250rpm.

4. Analysis result-easily printed

Integrated micro printer prints the test data after test, including weight, volume, tap number, tap density and operator.

5. Cover-easily to clean

The outer surface is plastic coated,it is strong and resistant to any powders non-corrosive or corrosive.It makes for the cleaning procedure as well as a long service life.