The Simultaneous Thermal Analyzer (TG-DSC) can provide both Thermogravimetric Analysis (TG) and Differential Scanning Calorimetry (DSC) signals simultaneously. Through a single measurement, it can obtain information about both mass changes and thermal effects of a sample.
The TG signal is used to study mass variation, composition analysis, thermal stability, oxidation/reduction behavior, decomposition processes, corrosion-related studies, and decomposition kinetics analysis.
The DSC signal is used to investigate melting/crystallization behavior, solid-state transitions, crystallinity, glass transition temperature, and oxidation resistance of materials.
By analyzing whether a thermal effect corresponds to a mass change, the specific physical or chemical process causing the thermal event can be identified. For example, it can distinguish between melting peaks, crystallization peaks, phase transition peaks, decomposition peaks, and oxidation peaks.
The instrument can monitor sample mass changes in real time as a function of temperature or time, enabling accurate calculation of transition enthalpy, reaction heat, and other thermal parameters.
It is widely used in the research and analysis of various materials, including organic compounds, inorganic materials, polymers, metals and alloys, ceramics, pharmaceuticals, food materials, energetic materials, and many other fields.
2. Main Technical Specifications
Operating temperature range: Room temperature to 1600℃
Heating rate: 0–50 K/min
Temperature accuracy: ±0.1℃ (standard metal calibration)
Enthalpy accuracy: ±1.0% (standard metal calibration)
Balance resolution: 0.1 μg
Testing atmosphere: Oxidizing, reducing, inert atmospheres, and vacuum conditions
Sample handling system: Equipped with a 20-position automatic sample changer; sample and reference positions can be freely assigned.
3. Working Principle
Thermogravimetry-Differential Scanning Calorimetry (TG-DSC) is a thermal analysis technique that simultaneously performs TG and DSC measurements on a sample under programmed temperature control and a controlled atmosphere.
During a single measurement, the same sample is used to obtain related information on both mass changes and thermal effects, providing comprehensive data for analyzing material composition, thermal stability, phase transitions, and reaction processes.